| Automation: | Automatic, Automation |
|---|---|
| Usage: | Trimming Machine for End Head |
| Application: | Edge Trimming and Shrinking Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Trimming and Shrinking(Flanging) Machine for Cylinder Head Edge
1. Machine instroduction- Working procedure
2. Main features of the equipment
2.1 Due to the good structural rigidity of the main parts, the precision linear slide rail is selected for the main sliding parts, the precision linear bearing is used as the guide, and the precision ball screw is selected for the feed adjustment parts.Centralized oil supply system is adopted for main transmission and moving parts, which can reduce wear and improve the stability of machine tool life and machining accuracy
2.2 The machine has a high degree of electrical automation, in addition to manual exchange for expanding arbor, other can be a key operation, motor installed with a frequency converter, control the rotation speed and feed speed, can meet all the workpiece process requirements (Φ222mm-Φ298mm).
2.3 The electrical control is concentrated in the electric control cabinet, and the reasonable layout of electrical circuits ensures the machine can work automatically and reliably. The emergency stop button on the equipment can stop the machine in time if there is an emergency.
3. Technical specifications and parameters
Equipment shape data: 1.8x1.1x2.7m (length * width x*height)
Equipment weight: 2.8 tons
Processing height range: 180mm ~ 260mm
Machining diameter: 222mm, 298mm
Delivery mould specification: Φ 222mm, Φ 298mm
Applicable material thickness: δ 1.5mm ~ δ 2.5mm
Applicable material: low carbon cold rolled steel plate
Working rhythm: 2 pieces / min
System pressure range: 0.4mpa-0.6mpa (air pressure)
Voltage: AC380V AC220V
4. Equipment structure
4.1 welding and aging treatment of section steel for main frame.
4.2 Table (gantry plane) processing. The surface roughness is less than 6.3.
4.3Box part is made of Q235 and A3 steel. The material is treated by vibration aging
4.4 Manual loading and unloading the bottom of cylinder, PLC program control, automatic work.
4.5 Electromagnetic clutch driven by the motor can ensure continuous 24-hour operation.
4.6 Machine runs smoothly with the same machining accuracy.
4.7 Paint films on the surface of the machine tool are bright and hard without leakage.
4.8 Sliding part adopts Taiwan Shangyin linear sliding rail.
4.9 TBI of Taiwan Shangyin is selected as the ball screw.
){kind=link}