LPG Gas Cylinder Polishing/Joggling/Trimming Machine

• Automation: Automation
• Usage: Trimming Machine for End Head
• Application: Edge Trimming and Shrinking Machine
• Processing Height Range: 180mm ~ 260mm or Customized
• Machining Diameter: 222mm, 298mm or Customized
• Applicable Material Thickness: 1.5mm - 2.5mm
• Working Rhythm: 2PCS Per Min.
• System Pressure Range: 0.4MPa-0.6MPa (Air Pressure)
• Transmission Type: Flexible
• Automatic Production Line: Comprehensive
• Certification: CE, ISO
• Flexible Production: Lean Production
• Rhythm: Flow Production Line
• Production Scope: Product Line
• Transport Package: Nude Packing or Wood Box
• Trademark: Getweld
• Origin: China (Mainland)
• Production Capacity: 100pieces/Year

Product Description

Trimming and Shrinking Machine for Cylinder Head Edge
LPG Gas Cylinder Polishing/Joggling/Trimming Machine

1. Machine instroduction- Working procedure

1.  This equipment adopts vertical processing technology,  After the work is finished, then reset, manual  unloading and taking out the waste ring, and the cyclic processing and production in turn.
   1. The necking/flanging part action,
   2. The lateral steel wheel feed polishing to cleaning bottom blank edge
   3. Machine rotates; the servo drives the trimming station action,
   4. The upper cylinder lowers and compresses the workpiece,
   5. The cylinder drives the workpiece to tighten,
   6. Start the button with both hands,
   7. Manually put the workpiece into the equipment,
   8. 

2. Main features of the equipment
2.1 Due to the good structural rigidity of the main parts, the precision linear slide rail is selected for the main sliding parts, the precision linear bearing is used as the guide, and the precision ball screw is selected for the feed adjustment parts.Centralized oil supply system is adopted for main transmission and moving parts, which can reduce wear and improve the stability of machine tool life and machining accuracy
2.2 The machine has a high degree of electrical automation, in addition to manual exchange for expanding arbor, other can be a key operation, motor installed with a frequency converter, control the rotation speed and feed speed, can meet all the workpiece process requirements (Φ222mm-Φ298mm).
2.3 The electrical control is concentrated in the electric control cabinet, and the reasonable layout of electrical circuits ensures the machine can work automatically and reliably. The emergency stop button on the equipment can stop the machine in time if there is an emergency.

3. Technical specifications and parameters
Equipment shape data: 1.8x1.1x2.7m (length * width x*height)
Equipment weight: 2.8 tons
Processing height range: 180mm ~ 260mm
Machining diameter: 222mm, 298mm
Delivery mould specification: Φ 222mm, Φ 298mm
Applicable material thickness: δ 1.5mm ~ δ 2.5mm
Applicable material: low carbon cold rolled steel plate
Working rhythm: 2 pieces / min
System pressure range: 0.4mpa-0.6mpa (air pressure)
Voltage: AC380V AC220V
4. Equipment structure
4.1 welding and aging treatment of section steel for main frame.
4.2 Table (gantry plane) processing. The surface roughness is less than 6.3.
4.3Box part is made of Q235 and A3 steel. The material is treated by vibration aging
4.4 Manual loading and unloading the bottom of cylinder, PLC program control, automatic work.
4.5 Electromagnetic clutch driven by the motor can ensure continuous 24-hour operation.
4.6 Machine runs smoothly with the same machining accuracy.
4.7 Paint films on the surface of the machine tool are bright and hard without leakage.
4.8 Sliding part adopts Taiwan Shangyin linear sliding rail.
4.9 TBI of Taiwan Shangyin is selected as the ball screw.


 

About us
GetWeld are devoting ourselves in designing and supplying LPG gas cylinder production line and Auto. Welding system. With professional team, we focus on full innovation solutions based on continuously enhanced technology, not just supply separate and conventional machines, but concentrating on follow-up project automation upgrading, we offer continuous and prospective project proposal. Keeping on site production supervision and phased acceptance can make sure of perfect product quality and reliable machine performance. Before machines are dispatched, equipment system integration and successful trial running on line is our advantage. And professional commissioning and training is one of work.

Our Service
* Inquiry and consulting support. 
* Sample testing support. 
* View  Factory.
* Training how to install and use the machine.
* Engineers available to service machinery overseas

FAQ
Q: Can your machine be customized ?
A: Yes, we are a professional manufacturer specialized in automatic welding 
equipment more than 25 years, we have a strong design & technical team, 
we can design and manufacture as your requirements. 

Q: How to get an accurate quotation ?
A: Please provide us the detail of the workpiece such as drawings or daily out put

Q: What's the shipping cost from China to your country ?
A: We can send machine to your port by sea . Customers specify freight forwarders or negotiable shipping methods.

Q: Payment terms, MOQ, warranty, FOB...
A: Payment terms: 30% down payment against order 
Minimum order quantity: 1 set
Delivery time: 2-4 months after receipt of formal order 
Warranty: 12 months following delivery. We offer online service 24 hours all day long, Skype, Email etc. You can contact us any time.